EZ Ration Processors

Welcome to the EZ Ration Processor!

Used Products

6Bale Tractor Pull EZ Ration Processor with Tandems 6Bale Tractor Pull EZ Ration Processor with Tandems
This is a nice 6 bale Tractor Pull EZ Ration Processor with Tandem Axle, Dual Floor Scales (right and left side) and a Discharge Hood. Due to circumstances beyond his control this customer is having to down size. He said he really loved feeding with this EZ Ration Processor and is sure its new owner will love it just as much. It has the tandem axles with the floating axles suspension system and the knife hood extension which allows you to stack the 3x4 midsize bales and load/feed 12 at a time if desired. This is the newer, very popular 3 round knife drum model. It is 4 years old and was reported to have been used very little last year or this year. I think an EZ Ration Processor with similar options would sell for over 65,000.00 new. There are not very many used EZ Ration Processors available, do not miss out on this one, call or email us soon. 800 242 9599 or ezration@ezration.com
$ 44,500
SOLD SOLD
CALL SOON it will probably not last long. With everything happening in the world today we are offering our used truck mounted Hydraulic Driven EZ Ration Processor and the 4x4 Int. Truck it is mounted on, at what I believe is the lowest price we have offered one in over 10 years. This is a really good deal. This is a 3 year old, Hydraulic Driven Model, EZ Ration Processor with the Grain Attachment and the Air Activated Grain Lid, the Air Activated Discharge Hood (which will be brand new), and the 3 Scale System. Like all EZ Ration Processors, it has the patented ability to change the amount of any of the three feed sources by varying the speed of the floor chains or the auger with the controls in the cab. Also, the 3 scale monitors correlate with each of the two different floor chains and the grain bin. (each feed source has its own scale system and monitor) The EZ Ration Processor will be gone through and sold with new knives and a new discharge hood as well as a with a 3-month warranty, just in case we miss anything. (parts only ordered through us). The 2001 4x4 International truck with the DT466 motor and New World Alison automatic transmission, will be serviced and gone over by our mechanic and sold in good faith to be good to go. We did just put a new ECM in the truck a few months back. As you can see it is in its working clothes as we are currently using it every day to feed with. It will not be available till the middle of May probably at the earliest. Call ASAP if you are interested in it. We also have some great deals on a limited number of new EZ Ration Processors for a very limited time. If you are holding cattle for a better market and need to feed them as efficiently as possible, or if you are just looking to feed more efficiently in general, do not miss this opportunity.
$ 59,900.00
SOLD SOLD
Another great deal. This 6 bale Tractor Pull EZ Ration Processor is being offered at a Covid 19 crisis opportunity price. Call soon if you are interested and we will get you contact information to capitalize on it. Like the old saying goes with every crisis there is always opportunity. This customer is down sizing and thought he would make this 15 year old machine available for someone else to be able to feed their cows more efficiently and he is willing to sale it for a really great price to help out in these crazy times.
$ 16,600.00
SOLD SOLD
This is a nice, nearly new, 4Bale, conventional drive, EZ Ration Processor with a Grain Attachment, with the complete three set Scale system, Air activated Discharge Hood, Air activated Grain Lid, Beater Hood Extension (not installed in Pictures) on a 4x4, relatively low mile, International truck, with the right specs to make it a great feed truck. The owner said thing changed and he lost some leases after he purchased the truck and since he is not able to use it like he planned he thought he would make it available for someone else to reap the feed efficiency benefits this truck will provide.
$ 75,000
 sold sold
This 2004 4X4 truck is the newer International body style with the New World Allison transmission and it has one of our New Hydraulic Dive EZ Ration Processors mounted on it. We used this unit on our ranch to feed our cows and for testing and development purposes. This new style International Truck and our Hydraulic drive EZ Ration Processor have both been in big demand and this is the first used one we have had to offer. The 2004 International 7400, 4X4 truck has the DT466 motor, an Allison (New World style) Automatic transmission, and a Hot shift PTO. The Hydraulic driven EZ Ration Processor on it is a 4 Bale unit, with the new two speed, 3 round drum, knife configuration, and with nearly all the options available. It has a Grain Attachment, Air Activated Grain Lid, Air Activated Discharge Hood, and the Complete 3 Scale System, (right floor, left floor, and the grain attachment each have their own scale system and monitor). Like all EZ Ration Processors it has the patented ability to control the speed of each floor chain, as well as the speed of the auger in the gain bin, all independently, allowing the producer to create any desired blend of the three different feed sources. This EZ Ration Processor, new (including the same used truck) with these options, would sale for over $99,000. This units would probably have the equivalent of one and a half feeding season on it (the unit was built nearly two years ago now) and it will come with a 3 month warranty (parts on EZ Ration Processor only) These units we use at our ranch are always great deals. They are about the only used unit you can buy with a warranty. You can click on the small picture to enlarge it and we will have additional pictures of this unit coming soon. We also have financing available. Call 800 242 9599 or email us at ezration@ezration.com to get on the list. (or for more information) As soon as this trucks replacement is ready we will start at the top of the list and go down until it is sold
$ $75,000
SOLD SOLD
This is our one of our new style Hydraulic drive EZ Ration Processors that we used on our ranch for testing and development purposes. The truck is a nice 4X4 2001 International truck with the DT466 motor, an Allison (New World style) Automatic transmission, and a Hot shift PTO. The EZ Ration Processor on it is a 4 Bale unit, with the new two speed, 3 round drum, knife configuration, and with nearly all the options available. It has a Grain Attachment, Air Activated Grain Lid, Air Activated Discharge Hood, and the Complete 3 Scale System, (right floor, left floor, and the grain attachment each have their own scale system and monitor). Like all EZ Ration Processors it has the patented ability to control the speed of each floor chain, as well as the speed of the auger in the gain bin, all independently, allowing the producer to create any desired blend of the three different feed sources. This EZ Ration Processor, new (including the same used truck) with these options, would sale for over $92,000. This units would probably have the equivalent of one feeding season on it (the unit was built nearly two years ago now) and it will come with a 3 month warranty (parts on EZ Ration Processor only) we are pricing it with a nearly 30% discount. We also have financing available. These units we use at our ranch are always great deals. I think we are currently nearly 3 months out on new orders. (Click on the small picture to enlarge and access additional pictures of this unit) $ 66,500.00
$ 66,500
SOLD SOLD
A 4 Bale tractor pull EZ Ration Processor in its work clothes. We had several of you looking for a used 4 bale tractor pull unit. This unit also has a grain attachment, wings, discharge hood, beater hood extension, duals, it is set up to stack 3x4 bales (you can put 8 3x4 bales on it). It is currently being used every day, so you know everything is in working order. In fact, this customer said they have gone through it and basically refurbished it. Their operation has grown and now they are getting one of our 6 Bale units (or 12 3x4 bales when stacked). This unit will be in use for a few more weeks but do not delay calling. I am sure most of you will not need it till next fall, but it will probably be gone by then. We can help you with financing if need be. Call soon if you are looking for a used EZ Ration Processor as you know used units are hard to come by and this one has been gone through and is ready to go.
$ 25,000
Sold Sold
We have been getting lots of calls for used units that would be available right away to start feeding with. This is a 6Bale Tractor Pull EZ Ration Processor ready to go. Like all EZ Ration Processors the two floor chains are individually controlled so you can blend your hays/feed/roughage in any desired ratio, which can dramatically reduce winter feed cost. The customer loves this unit and has had great success with it but would like to upgrade and get a grain attachment too. However, he wants to get on our order list soon so he will have his new EZ Ration Processor before he needs to start feeding with it, or he will just keep this one. He said he does not want to have to pitchfork his hay to his cows. So this unit is not going to be available very long. As most of you know we are 3 months out on orders for new EZ Ration Processors. This EZ Ration Processor is in WY. Call for more info 800 242 9599 or email us at ezration@ezration.com
$ 30,000 firm
Sold Sold
This is a really nice, nearly new, 4 bale Tractor Pull EZ Ration Processor with a Grain Attachment and a Discharge Hood. This is one of our new Three Round knife Drum models with In- Cab Controls and like all EZ Ration Processors it has independently controlled floor chains and grain auger speeds. This unit is verily 2 years old but I think it was only used for one feeding season. The ranch sold and the owner is retiring. This is nearly a $13,000.00 discount off what this unit would sale for new. I know a lot of you have been asking about used units. Here you go. Call soon if you are interested. I do not think it will last long. 888 242 9599 (more pictures coming soon)
$ 35,000
SOLD SOLD
We finally have a used 4-Bale EZ Ration Processor Tractor Pull available and with nearly all the bells and whistles you could get on one. The Grain Attachment - Discharge Hood - Complete Three Scale System (which allows you to weigh each feed source independently) - this is really a benefit creating rations for different groups of cattle. Such as: first calf heifers, running aged cows, yearlings, bulls, etc.. This unit also has the Stake Pockets and as you can see in the pictures they have it set up to blend silage with hay if so desired. This unit would be verily 4 years old and looks to be in great shape. Give us a call if you are interested or would like more information on this EZ Ration Processor. 800 242 9599 - or email us at: ezration@ezration.com (click on the small picture to enlarge and access additional pictures of this unit)
$ 35,000
SOLD SOLD
This is our EZ Ration Processor that we are currently feeding with on our ranch. This is a nice 4X4 97 International truck with the DT466 motor and the 653 Allison Automatic transmission, the Allison transmission with the extra low gear that is really nice to feed with, and a Hot shift PTO. -- The EZ Ration Processor on it is a 4 Bale unit, with the new 3 round beater knife configuration, with a Grain Attachment, Air Activated Grain Lid, Air Activated Discharge Hood, and the Complete 3 Scale System. This EZ Ration Processor, new (including the used truck) with these options, would sale for over $86,000. -- These units are always a good deal--and come with a 3 month warranty (parts on EZ Ration Processor only) -- We will make a list of interested customers and just start at the top of the list (after we determine the price and how soon it will be available) and go down the list until the unit is sold –If you want to be on the list for this unit please call 800 242 9599 --- We will try to have it determined who is getting it before the end of April. That will allow everyone on the list below whoever gets this unit to still place an order and beat the price increase coming May 1st.
$ 62,500
 SOLD SOLD
This is our demo unit that was used on our ranch during the 2011 - 2012 feeding season. In fact we just got done feeding with it when we took this picture. Note the chains still on the front tires. This truck is great in the mud and snow. The Truck is a 96 international with the DT466 motor and the 643 Allison Automatic with a Hot shift PTO (click on the picture to enlarge) -- The EZ Ration Processor is a 4 Bale Unit with a Grain Attachment - Air Activated Grain Lid - Air Activated Discharge Hood - and the Complete 3 monitor Scale System (Grain attachment, right floor, and left floor) These units are always a good deal--and come with a 3 month warranty (parts on EZ Ration Processor only) The warranty period starts when you start using the truck -- Not when it is sold -- Call 800 242 9599 or email us at ezration@ezration.com - Leave a message if it is after hours. We will be done feeding with it around May 15th and it will be serviced and delivered shortly there after.
$ 63,000
Sold Sold
This is a really nice 4 Bale EZ Ration Processor with a Grain Attachment and nearly all the other available options. Such as: Air Activated Discharge Hood, The Independent Three Scale system, Air Activated Grain Lid, and Stake Pockets. The EZ Ration Processor would be 5 to 6 years old and like all EZ Ration Processor we have ever made, it has the ability to control the left floor chain separate from the right floor chain to blend different roughage in any desired ratio. The grain auger is also independently controlled to vary the amount of grain or cake dispensed. It is mounted on a 2000 International 4x4 truck with the DT466 motor and the MT643 Allison transmission. The customer bought it used and did some upgrading on the EZ Ration Processor and they said they also put right around $15,000 into the truck getting everything in great condition down to even any seal that was leaking or gauge fixed that needed it. They say the truck is in great working condition and is currently being used every day. However, this truck has the MT643 Allison transmission, which does not have the extra low creep gear in it. They feed primarily in bunks and would like to get a truck with a lower gear and they know now is the best time to sale a feed truck. My understanding is it would be ready to go to work for you right away. Call us if you are interested and we will hook you up with the needed phone numbers to get something going on it.
$ 65,000
Sold Sold
This is a nice unit that has the in cab controls to control each side individually.It also has the beater hood extension for stacking midsize bales. This customer trades up every three to four years and if you get a deal made on it you could probably get a back haul rate when they deliver his new one and they could pick this one up. I think his new one is set to ship from the factory shortly. We have more pictures and even some video the customer sent us of it running. Call for more info 800 242 9599 or email ezration@ezration.com
$ 30,000

Contact Us!